Name: Good-N/A Oil Reservoir Dryer Solution
Model:
Brand: SOLGE
Application: Oil Reservoir Accessory Series
Category: Oil Reservoir Accessory Series
Standard:
Feature:

SOLGE

Good-N/A Oil Reservoir Dryer Solution

All equipment failures are caused by contamination (moisture / particles)". Water contamination can cause unexpected failure of the equipment due to the destruction of the oil film (lubricating film) caused by moisture and the occurrence of corrosion. This contamination flows through the gap in the poor air breather or equipment. The GooD-A and GooD-N products not only completely block external contaminants from entering the gear box or reservoir but also function to dry and drain the moisture in the oil and improve the reliability of the equipment.

Membrane Module

Constant dry nitrogen (N2) and dry air are generated and flow into reservoir Instrument Air. Continuous operation controls the flow of external contaminants during operation Internal moisture removal Since there is no rotating element, there is almost no fault element. Low cost of maintenance due to consumables only with shear filter Oxygen is shut off to significantly reduce oil oxidation and delay deterioration (GooD-N model). Extending the lifetime of the bleeder desiccant in conjunction with the existing dehumidifying air breather.

Good Application

  • Cooling Tower Gearbox
  • Wind turbine
  • Hydraulic Unit
  • Mobile Construction Equipment
  • Oil Storage Tank etc
  • EHC UNITS (Especially synthetic ester based fluid)


Specification

GooD-A

GooD-N

Generating Air

Dry Air

Dry Nitrogen

Dew point (℃)

Below -61.5℃ 

Below -61.4C

Inlet/Outlet

1/2” PT

1/2” PT

Size (L*OD[mm])

590*55

856*110

Outlet

20-100L/Min

5-25 L/Min

N2 Purity 

(@100psi/at 21℃)

N/A

>97%

 

The current number of visitors: 2688449